Characteristics: Colourless, satin-glossy drying wood oil containing wax, based on renewable oils, some of which are boiled with natural resins.
- easy to use
- resistant to many household chemicals
- safe for toys
Areas of application: For treating raw wood indoors or for wood already primed with CLOU Wood Oil, to enhance the surface finish, and for caring and revitalising oiled woods. Produces a smooth, easy to grip and optically appealing surface.
Storage/disposal: Store in well sealed original containers in a cool place protected from frost. Leftover varnish must undergo special treatment in compliance with the official regulations. Recommended waste code according to the European waste directory: 08 01 11 (the final determination must be coordinated through the regional waste utility). Dried residues can be disposed of in the normal household rubbish.
Can be stored for 3 years in sealed original containers.
Safety precautions: Spray only in a water wash spray booth. Remove spray mist regularly in order to avoid ignition of the spray dust.
Do not operate in a spray booth together with nitro lacquer (danger of auto ignition of the nitro lacquer residues). Soak used rags in water due to the danger of auto ignition and dispose of them. The product itself is not self-igniting.
Labelling according to Regulation (EC) No 1272/2008
Signal word: Warning
H226 - Flammable liquid and vapour.
EUH066 - Repeated exposure may cause skin dryness or cracking.
P101 - If medical advice is needed, have product container or label at hand.
P102 - Keep out of reach of children.
P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P243 - Take action to prevent static discharges.
P280 - Wear protective gloves/protective clothing/eye protection/face protection.
P370+P378 - In case of fire: Use to extinguish: CO2, sand, extinguishing powder.
P501 - Dispose of contents / container in special waste collection points in accordance with local/ regional/national and / or international regulations.
Preparation: The wood surface to be coated must be completely dry and free of oil, grease, wax and sanding dust. If required, apply 1-2 undercoats of CLOU Wood Oil. On woods containing tannic acids and pigment colouring, a test should first be carried out on an inconspicuous part.
Application: (Surface temperature > 15 °C, Moisture content of wood:
Sand according to area of application between 150 grain (floors) and 240 grain (furniture). Shake or stir well before use. The sanding down and oil application should always be carried out along the wood structure.
Apply the coats thinly, in order to ensure that they dry well
through. Only apply one coat per day. According to the amount of wear, 2-3 coats are necessary.
Special Instructions: During application and drying ventilate well.
Care is needed when coating the insides of cupobards and drawers. The lack of oxygen and light can delay the drying process, which can produce an unpleasant smell manifesting itself as a long-lasting linseed odour. For this application, Shellac coating and spraying lacquer are more suitable.
CLOU HARTWACHS - OIL WAX for wooden floors and stairs is available in cans of 0.75 L.
NOTE: At the bottom of this page is available the Technical Data Sheet as well the Safety Data Sheet of the CLOU HARTWACHS-ÖL (OIL) WAX product.