CLOU ANTIK WACHS (WAX) LIQUID
Characteristics: Colourless, low-odour wax made of pure and natural beeswax and carnauba wax. Protects and maintains wood surfaces in a natural way. Produces naturally lustrous, visually very appealing surfaces with a great feel. With vegetable raw-material base. Moreover it penetrates quickly and deeply and imparts breathable surface protection.
Areas of Application: For looking after, revitalising and refining untreated or already waxed/oiled woods in indoor areas. Particularly suitable for preserving the value of antique objects such as furniture, chests, carvings, sculptures and picture frames. Can also be used as overcoat for surfaces which were stained with AQUA CLOU wood stain.
Contents (as per VdL-RL 01, the German association for paint and printing inks’ guideline for declaring paint products): Beeswax, carnauba wax, additives, hydrocarbons, dearomatised white spirit, dryer.
Colour shades: colourless
Storage: Store in well-sealed original containers in a cool place protected from frost. Can be stored for 5 years in original sealed containers.
Safety precautions: Wear suitable protective clothing. Avoid contact of product with eyes or skin. Ensure there is a good supply of air during work and drying. Do not allow product to find its way into the sewage system, surface waters, or groundwater. Please refer to the safety data sheet for more information.
Preparation: The wood surface to be treated must be clean, dry and free of oil and grease. Sand surfaces to be renovated with 240 grit and thoroughly remove dust from sanding. It is recommended to try first on a test area.
Processing: (Surface temperature > 15 °C, residual moisture 8 – 12 %) Wax, workpiece and ambient temperature should not be below 15 °C during the working and drying time. Shake antique wax well before use. Apply uniformly and not too saturated with brush or dabber. The wax coat should be
as thin as possible to prevent sticking on the surfaces later. With good ventilation dry for approx. 6 – 8 hours and repeat the application. A second application produces a more full-bodied wax film. After drying, polish the surface with a CLOU wax polishing brush until a silky lustre is produced.
Cleaning the work equipment: Clean the used brushes thoroughly with CLOU Universal Colour-Solver or CLOU EV-Thinner immediately after use. Properly dispose of any residues from cleaning.
Special Instructions: Oil-soaked cloths can potentially ignite spontaneously. For this reason, soak them with water after use and spread them out to dry in the open. The product itself cannot ignite spontaneously.
The colorless CLOU ANTIK-WACHS (WAX) LIQUID is available in cans of 0.25L.
NOTE: At the bottom of this page is the Technical Data Sheet as well as the Safety Data Sheet of the CLOU ANTIK-WACHS (WAX) LIQUID product.