SMALTOFILL ACRYLLIC PUTTY - VECHRO PAINTS

SMALTOFILL ACRYLLIC PUTTY - VECHRO PAINTS

Acrylic putty for interior and exterior use. Suitable for wood, plaster, concrete, plasterboard.

GENERAL CHARACTERISTICS: White putty based on co-polymer acrylic resins for indoor and outdoor use. Can be used for troweling surfaces of wood, plaster, concrete, plasterboard, etc. It works softly, spreads evenly, does not drip and fills perfectly. It dries quickly without popping and is easily rubbed giving a smooth and durable surface.

TECHNICAL CHARACTERISTICS:

Special Weight: 1,69 – 1,72 kg/lt.

Covering Power: 2-3 m²/kg per coat.

Dilution: Ready for use. Drying 1–2 hours, depending on layer’s thickness.

Recoatability: Recoatable 8 - 10 hours after drying de pending on temperature and humidity.

VOC Class: “Sealing Primers”. Type WB. VOC limit = 30gr/lt. Max VOC of product ready for use = 25gr/lt. VOC: organic volatile compounds with boiling point < 250°C.

Shades: White.

SURFACE PREPARATION: Clean the surface of dust, oil, cropped paints and dampness.

APPLICATION: Apply uniformly. When dry, sandpaper well and prime.

APPLLICATION CONDITIONS: Temperature 8-30°C and relative humidity lower than 80%. Con trary weather conditions may degrade paint’s quality. New con cretes or masonry should be dried for a period of 3-4 weeks before priming.

STORAGE: Close well after use. Store in a cool place. Protect from sun expo sure.

SAFETY: Read instructions on back side of the product. Keep out of the reach of children.

Poison Control Center Number: +30 2107793777.

SMALTOFILL acrylic putty by VECHRO PAINTS is available in 400 gr containers.

NOTE 1: At the bottom of this page you will find the Technical Data Sheet* in greek and english for the product  SMALTOFILL ACRYLLIC PUTTY - VECHRO PAINTS

*TECHNICAL BROCHURE E-8051, DATE OF PUBLICATION 31/07/2018, MOD. 11/09/2023

NOTE 2: For detailed safety instructions, obtain the Safety Data Sheet (MSDS) from VECHRO S.A. Tel. +30 210 48 16 101, www.vechro.gr