Data sheet
| PACKAGING | METAL |
More info
NELFALITE - WOOD LACQUER - XTREME SYSTEM
Properties: NELFALITE XTREME SYSTEM by NELF is a waterproof based lacquer for exterior and interior surfaces. Suitable for doors, windows, wooden constructions, forks, railings etc. As a primer and topcoat on new and already treated wood work for outside.
- Suitable for less even surfaces
- Water repellent
- Very good weather resistant
Also suitable for concrete, cement, stone, metal and PVC plastic surfaces. It gives a homogeneous and glossy surface, it is waterproof with great elasticity that gives it excellent durability. Does not turn yellow from the sun.
Application: NELFALITE XTREME SYSTEM varnish is applied to raw or varnished wood after sanding well with sandpaper. NELFALITE XTREME SYSTEM is diluted with 0-5% whitespirit.
For external use the 3 hands are necessary. Each hand should be passed after 24 hours, after sanding (free sandpaper 220). Preferably use a brush.
Yield: One (1) liter is enough to cover an area of 10-12 sqm. If the surface is coated with old varnish or oil paints, use corrosive NELF – WENFEX to remove them.
Label elements:
Labelling according to Regulation (EC) No 1272/2008
Hazard pictograms:
GHS02
Signal word: Danger
Hazard Statements (CLP):
H226 - Flammable liquid and vapour.
Precautionary statements (CLP):
P102 - Keep out of reach of children.
P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P501 - Dispose of contents/container in accordance with local/regional/ national/international regulations.
EUH sentences :
EUH066 - Repeated exposure may cause skin dryness or cracking.
Caution! It is a flammable material. Keep away from children.
NELFALITE XTREME SYSTEM waterproof based lacquer are available in cans of 1.0L.
NOTE: At the bottom of this page is the Technical Data Sheet as well as the Safety Data Sheet of the NELFALITE - WOOD COLORED LACQUER - XTREME SYSTEM.
