Data sheet
| PACKAGING | METAL |
More info
NELFALIN XT IMPREGNEER - COLORLESS & COLORED WOOD AND FRAME PROTECTION VARNISH
NELFALIN XT IMPREGNEER colored preservative varnish with a low VOC content, is suitable for the protection of wood and frames. Is a colorless and colored preservative thin-flowing wood varnish for outdoor and indoor use. Strong penetration into the wood. Gives a glossy surface, does not create a crust and therefore does not peel. On new and already treated woodwork outside.
NELFALIN XT IMPREGNEER is based on a modified alkyd resin.
Contains: Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% aromatics.
Characteristics:
Base: modified alkyd resin
Density 20 ° C: 0.85 kg / dm³
Drying time: at 20 ° C and RH 65%
Can be painted: after about 24 hours
Gloss: semi-matte
Solids content: approximately 25 vol%
Theoretical yield: 16 m² per liter
Dilution: Do not dilute.
Finish: transparent
Passage: Brush / Roller
Shelf life: in closed original packaging and in frost-free storage for at least 12 months.
Instructions for use: NELFALIN XT IMPREGNEER does not need further dilution and can be used on all types of deciduous and coniferous wood. First remove any fungus, moss and deposits so that the surface is free of grease. The substrate must be clean, dry, free of grease, load-bearing and free of (blue) mold. If necessary, pre-treat with a fungicide or dehydrating water according to the manufacturer's instructions.
The system of NELFALIN XT IMPREGNEER varies according to the surface:
Treated wood (new): Treat at least 3 times with Nelfalin XT Impregneer.
Untreated wood (new): Treat at least 3 times with Nelfalin XT Impregneer.
Note: For untreated less durable types of wood, 1 or 2 additional coats are recommended.
Treated Surface: Substrates that have already been treated with Nelfalin XT Impregneer and are in good condition can be restored to optimum condition after light sanding and application of 1 or 2 coats of Nelfalin XT Impregneer.
Gray wood: Lightly sand and apply at least 3 coats of Nelfalin XT Impregneer.
Label elements:
Labelling according to Regulation (EC) No 1272/2008
Hazard pictograms:
GHS02 GHS07
Signal word: Warning
Hazard Statements (CLP):
H319 - Causes serious eye irritation.
H412 - Harmful to aquatic life with long lasting effects.
Precautionary statements (CLP):
P101 - If medical advice is needed, have product container or label at hand.
P102 - Keep out of reach of children.
P264 - Wash hands thoroughly after handling.
P280 - Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 - If eye irritation persists: Get medical advice/attention.
P501 - Dispose of contents/container at special waste collection points, in accordance with local, regional, national and/or international regulations.
EUH sentences: EUH066 - Repeated exposure may cause skin dryness or cracking.
EU Limit value: cat. A/f max. 700g/l. Contains max. 700 g/l VOC
Subcategory: Absorbent wood paints.
Poison Center Telephone: 210 7793777 (in Greece).
Color palette - Packaging: NELFALIN XT IMPREGNEER wood protection varnish for external use is available in colorless and in 14 wood colors (see Color chart):
The wood colors with their codes are the following:
100 colorless,
101 natural,
102 oak,
103 mahogany,
104 walnut,
105 oregon,
106 rosewood,
108 black,
109 tick,
110 chestnut,
111 light green,
112 dark walnut,
114 red,
115 blue,
116 green
NELF's NELFALIN XT IMPREGNEER preservative thin-flow wood varnish is available in n cans of 1.0L and 2.5L.
In addition and upon request, NELFALIN XT IMPREGNEER varnish is available from our company, at the same price and in all RAL colors (International Coloring System) in cans of 1,0L and 2,5L.
NOTE: At the bottom of this page is the Technical Data Sheet as well as the Safety Data Sheet of the NELFALIN XT IMPREGNEER - COLORLESS & COLORED WOOD AND FRAME PROTECTION VARNISH.
