NELFALIN XT IMPREGNEER NELF - WOOD IMPREGNATION VARNISH

New

NELFALIN XT IMPREGNEER NELF - WOOD IMPREGNATION VARNISH

   

More details

25,00 €

Data sheet

PACKAGING METAL

More info

NELFALIN XT IMPREGNEER NELF - WOOD IMPREGNATION VARNISH

Properties: NELFALIN XT IMPREGNEER by NELF is a colorless solvent-based wood varnish for all hardwood and softwood outdoors. It provides highly impregnating wood protection for a transparent finish on new or previously treated exterior wood structures. It has strong penetration into the wood. It gives a glossy surface, does not create a crust and therefore does not peel. It can also be used as a transparent primer under a transparent or opaque (varnish) finish.

NELFALIN XT IMPREGNEER is based on a modified alkyd resin.

Characteristics:

Base: modified alkyd resin
Density 20 ° C: 0.85 kg / dm³
Drying time: at 20 ° C and RH 65%
Can be painted: after about 24 hours
Gloss: satin
Solids content: approximately 25 vol%
Theoretical yield: 16 m² per liter
Dilution: Do not dilute.
Finish: transparent
Passage: Brush / Roller
Shelf life: in closed original packaging and in frost-free storage for at least 12 months.

Instructions for use: NELFALIN XT IMPREGNEER does not need further dilution and can be used on all types of deciduous and coniferous wood. First remove any fungus, moss and deposits so that the surface is free of grease. The substrate must be clean, dry, free of grease, load-bearing and free of (blue) mold. If necessary, pre-treat with a fungicide or dehydrating water according to the manufacturer's instructions.

The system of NELFALIN XT IMPREGNEER varies according to the surface:

Treated wood (new): Treat at least 2 times with Nelfalin XT Impregneer.

Untreated wood (new): Treat at least 3 times with Nelfalin XT Impregneer.

Note: For untreated less durable types of wood, 1 or 2 additional coats are recommended.

Treated Surface: Substrates that have already been treated with Nelfalin XT Impregneer and are in good condition can be restored to optimum condition after light sanding and application of 1 or 2 coats of Nelfalin XT Impregneer.

Gray wood: Lightly sand and apply at least 3 coats of Nelfalin XT Impregneer.

Label elements:

Labelling according to Regulation (EC) No 1272/2008

Hazard pictograms:

       

            GHS02                                 GHS07                               GHS08       

Signal word: Danger

Hazard Statements (CLP):

H226 - Flammable liquid and vapour.

H319 - Causes serious eye irritation.

H336 - May cause drowsiness or dizziness.

H412 - Harmful to aquatic life with long lasting effects.

Precautionary statements (CLP):

P101 - If medical advice is needed, have product container or label at hand. 

P102 - Keep out of reach of children.

P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

P264 - Wash hands thoroughly after handling.

P271 - Use only outdoors or in a well-ventilated area.

P280 - Wear protective gloves/protective clothing/eye protection/face protection.

P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.  

P337+P313 - If eye irritation persists: Get medical advice/attention.

P405 - Store locked up.

P501 - Dispose of contents/container at special waste collection points, in accordance with local, regional, national and/or international regulations.

EUH sentences: EUH066 - Repeated exposure may cause skin dryness or cracking. 

May produce an allergic reaction.

EU Limit value: cat. A/f max. 700g/l. Contains max. 700 g/l VOC

Materials contaminated with the product, such as cleaning cloths, may ignite spontaneously.

Poison Center Telephone: 210 7793777 (in Greece).

Color palette - Packaging: NELFALIN XT IMPREGNEER wood protection varnish for external use is available in colorless and in 14 wood colors (see Color chart):

The wood colors with their codes are the following:
100  colorless,
101  natural,
102  oak,
103  mahogany,
104  walnut,
105  oregon,
106  rosewood,
108  black,
109  tick,
110  chestnut,
111  light green,
112  dark walnut,
114  red,
115  blue,
116  green

NELF's NELFALIN XT IMPREGNEER preservative thin-flow wood varnish is available in n cans of 1.0L and 2.5L.

NOTE: At the bottom of this page is the Technical Data Sheet as well as the Safety Data Sheet of the NELFALIN XT IMPREGNEER NELF - WOOD IMPREGNATION VARNISH.

5 other products in the same category:

Download

NELFALIN XT IMPREGNEER_SDS

SAFETY DATA SHEET (GR), REV. 14.12.2020

Download (431.05k)

NELFALIN XT IMPREGNEER_SDS

SAFETY DATA SHEET (NL), REV. 14.12.2020

Download (177.86k)

NELFALIN XT IMPREGNEER_SDS

SAFETY DATA SHEET (NL), REV. 16.12.2021

Download (273.26k)

NELFALIN XT IMPREGNEER_TDS

TECHNICAL DATA SHEET (NL) - REV.13.02.2024

Download (187.5k)

NELFALIN XT IMPREGNEER_SDS

SAFETY DATA SHEET (NL) - REV.27.2.2023

Download (279.46k)